Star Metro - Axo Metals Drilling Intercepts 48.0 Metres of 1.18 g/t Au From Surface at Recently Discovered Luz del Cobre Target; Additional Results Include 3.94 g/t Au Over 15.0 Metres

"Drilling at San Antonio continues to deliver excellent results as we follow up on the previously announced discovery hole, 26-048" says Jonathan Egilo, President & CEO. "We are particularly excited about the Luz del Cobre target due to its proximity to our existing and permitted infrastructure, in addition to the fact that strong oxide gold mineralization is being seen either directly from surface, or at relatively shallow depths. With two of our three diamond drill rigs remaining focused on resource expansion drilling, we are excited to continue showcasing that the scale of San Antonio is growing."

San Antonio Drill Results
Axo Metals is reporting the results from 33 drillholes, and approximately 3,700 metres of drilling. Today's results include drilling from the recently announced Luz del Cobre discovery, following up on the highlight hole SOSAP-26-048 which, as previously announced, returned 46.5 metres grading 1.43g/t Au of oxide mineralization directly from surface. The Luz del Cobre target is approximately 750 metres east of the Sapuchi pit-constrained resource. In addition to drilling at the Luz del Cobre target, today's drilling release contains results in the gap zone between the Luz del Cobre target and the Sapuchi resource, as well as further testing around the peripherals of the Sapuchi deposit.

New results in the Luz del Cobre area continue to be encouraging, including Hole SOSAP-26-069 which returned 48.0 metres of 1.18g/t Au of oxide material directly from surface. Initial drilling in the Luz del Cobre-Sapuchi gap has confirmed at least 450 metres of mineralized strike length. While the Company continues to view the Sapuchi deposit as an excellent starter pit option due to the elevated oxide grades and favourable topography, management notes that Luz del Cobre is only ~1.8km away from the existing plant infrastructure and, due to the area being a past producing open pit, is already connected to the San Antonio infrastructure via haul roads. Thus, the Company is evaluating Luz del Cobre as another compelling option to be mined early in the San Antonio mine life.

Highlights from today's results include:

• Hole SOSAP-26-073 which returned two intercepts of 0.81g/t Au over 17.9 metres from only 29 metres down the hole and 0.90g/t Au over 19.9 metres from 55 metres down the hole at the outer edge of the Sapuchi resource.

FIGURE 1: NEW DRILLHOLE LOCATIONS ACROSS THE SAPUCHI DEPOSIT AND LUZ DEL COBRE TARGET

Figure 2 below shows a cross section that covers approximately 450 metres between the recently discovered Luz del Cobre zone and the existing Sapuchi resource. Hole SOSAP-26-069 from today's release lies at the base of the former Luz del Cobre historical pit, while hole SOSAP-26-080 returned multiple long intervals of above cut-off mineralization. All drilling in the area is considered resource expansion.

The Luz del Cobre historical pit was operated from 2011 to 2018 and solely focused on the mining of copper oxide, with 2.8Mt of copper oxide ore mined in that time period. The drilling around Luz del Cobre that is returning strong grades of oxide gold mineralization are not returning material grades of copper, which the Company views as a positive from a metallurgical standpoint.

FIGURE 2: SECTION VIEW ACROSS LUZ DEL COBRE HIGHLIGHTED BY HOLES SOSAP-26-069 AND SOSAP-26-080

Drill Plans and RC Waste Dump Drilling Program
There are currently three diamond drill rigs turning at San Antonio. Two are focused on resource expansion drilling around Luz del Cobre and within the Luz del Cobre-Sapuchi gap zone. The third drill rig is positioned at Sapuchi, infilling inferred resource blocks and testing areas to convert waste to ore within the resource pit shell.

The Company is also exploring the gold potential contained within the waste dumps that were built from historical Luz del Cobre operations. From late 2021 to mid-2023, Osisko Gold Group (formerly known as Osisko Development), San Antonio's operator prior to Axo's acquisition, mined and processed 1.14Mt of waste dump material grading 0.58g/t Au, recovering 74% via heap leaching, and selling 13,591 gold ounces. Axo has recently completed a ~1,900 metre reverse-circulation (RC) drill program through these waste dump, which has been drilled off to approximately 25 x 25 metre spacings. The Company believes the waste dumps could provide a compelling option for additional resource growth at San Antonio, with any discovered ounces providing an option to potentially expedite production at San Antonio through the processing of waste dumps - at potentially low operating costs and low capital intensity. The waste dumps are situated ~1.8km away from the carbon-in-column plant, and connected via haul roads. The Company expects to receive and disclose these RC drilling results prior to year-end.

FIGURE 3: PLAN VIEW SHOWING THE LOCATION OF WASTE DUMPS RELATIVE TO SAN ANTONIO EXISTING INFRASTRUCTURE

La Huerta Update
The Company is announcing that it has elected to terminate the option agreement for the La Gallina concession at its La Huerta copper project in Jalisco, Mexico. Axo Metals continues to retain full ownership of the Juanes concession, which is the concession that holds the overwhelming majority of metres drilled at La Huerta, and all material drilling previously announced and disclosed by the Company. For more details about the La Gallina option agreement, please see our most recent financial statements and MD&A located on SEDAR+.

Table 1: San Antonio Assay Results

¹LDC = Luz del Cobre
²NSV=No significant values

Table 2: San Antonio Drillhole Coordinates

About Axo Metals
Axo Metals Corp. is a Canadian mineral exploration company engaged in the exploration and development of mineral properties in Mexico. The Company holds two projects. The San Antonio project is located in the state of Sonora, and is in advanced development. Total resources at San Antonio stand at 576koz Au and 1.37moz Ag grading 1.20 g/t Au and 2.9g/t Ag in the Indicated category, with 544koz Au and 1.76moz Ag grading 1.02 g/t Au and 3.3g/t Ag in the Inferred category across all deposit types (oxide, transition and sulphide). Axo's second project is the La Huerta property, a new copper discovery in Jalisco, Mexico. Initial exploration has yielded high-grade copper both at surface through sampling programs, and at depth through initial drilling.

Additional information can be found at the Company's website: www.axometals.com.

Procedure, Quality Assurance / Quality Control and Data Verification

The diamond drill core (HQ size) is geologically logged, photographed and marked for sampling. When the sample lengths are determined, the full drill core is sawn with a diamond blade drill core saw with one half of the drill core being bagged and tagged for assay. The remaining half portion is returned to the drill core trays for storage and/or for metallurgical test work.

The sealed and tagged drill core sample bags are transported to the ALS Chemex facilities in Querétaro and Zacatecas, Mexico. ALS Chemex crushes the samples and prepares 200-300 gram pulp samples with ninety percent passing Tyler 150 mesh (106 μm). Copper and multi-element analysis is completed using total digestion (Code ME-ICP61 Total Digestion ICP). Over limits greater than 10,000 grams per tonne copper are assayed using Cu-OG62.

Quality assurance and quality control ("QA/QC") procedures monitor the chain-of-custody of the samples and include the systematic insertion and monitoring of appropriate reference materials (certified reference materials, blanks and duplicates) into the sample strings. The results of the assaying of the QA/QC material included in each batch are tracked to ensure the integrity of the assay data. All results stated in this announcement have passed Axo's QA/QC protocols.

Grab and trench exploration samples are geologically logged, photographed and marked for sampling and processing in the Company's on-site laboratory. The sealed and tagged sample bags are transported to the San Antonio On Site Laboratory, in San Antonio de La Huerta, Sonora. Initially, the sample undergoes primary size reduction using a jaw crusher to a nominal particle size of 1/2 inch. The crushed material is subsequently homogenized and split using a riffle splitter.Once completely dry, the sample is pulverized with ninety percent passing 200 mesh.The prepared pulp is subsequently processed by 30g fire assay. The resulting doré bead is then dissolved by acid digestion using aqua regia. The resulting solution is diluted to the appropriate volume and analyzed by atomic absorption spectrometry (AAS) to determine the gold concentration in the sample. Quality assurance and quality control ("QA/QC") procedures monitor the chain-of-custody of the samples and include the systematic insertion and monitoring of appropriate reference materials (certified reference materials, blanks and duplicates) into the sample strings. Results are preliminary and have not yet been verified by an independent, certified commercial laboratory.

Qualified Person
Charles Spath, P. Geo., is the Qualified Person for Axo Metals Corp., as defined under National Instrument 43-101, and is non-independent. Mr. Spath has reviewed and approved the scientific and technical information in this press release.

For inquiries, please contact:
Jonathan Egilo, President and CEO
Via email: [email protected]

Forward-Looking information:
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release includes certain "forward-looking statements". All statements other than statements of historical fact included in this release, including, without limitation, statements regarding the Company's exploration and drilling plans at the San Antonio and La Huerta projects and receipt of all necessary regulatory approvals, are forward-looking statements that involve various risks and uncertainties. Forward-looking statements are frequently characterized by words such as "will", "propose", "may", "is expected to", "subject to", "anticipates", "estimates", "intends", "plans", "projection", "could", "vision", "goals", "objective", "focus" and "outlook" and other similar words. Forward-looking information in this news release is based on the opinions and assumptions of management considered reasonable as of the date hereof, including, but not limited to, general business and economic conditions will not change in a materially adverse manner; the potential of gold and copper mineralization at the Company's properties; the results (if any) of further exploration work to define and expand mineral resources; the ability of exploration work (including drilling) to accurately predict mineralization; and the ability to generate additional drill targets. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, there can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company's expectations include environmental risks, limitations on insurance coverage, risks and uncertainties related to exploration, development, operations, commodity prices and global financial volatility including as a result of tariffs, risks and uncertainties of operating in a foreign jurisdiction as well as additional risks described from time to time in the filings made by the Company with securities regulators. The Company disclaims any intention or obligation to update or revise any forward-looking information, other than as required by applicable securities laws.

Cautionary statement: by their nature, surface or chip samples are selective samples and may not represent true underlying mineralization.

SOURCE: Axo Metals Corp.

View the original press release on ACCESS Newswire

A.Lavoie--SMC